276°
Posted 20 hours ago

LTP MATTSTONE Sealer - Impregnating Stone Sealer (1 LITRE)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

As above, the sealer can be applied to the tiles before they are laid, or at least 12 hours before grouting the tiles. Ensure you shake the bottle well and apply the product in accordance with the instructions on the bottle. Remember if using a roller, brush or cloth they must be appropriately washed out with white spirit and then disposed of carefully. Do not leave them exposed to direct sunlight, as if linseed is allowed to dry on a roller, brush or cloth, it can become self-combustible. Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex, at 1:10. Rinse well to remove residues and leave to dry (24hrs). After placing the tile on the adhesive, they can use their hands or a rubber hammer to level the tile surface. To cut the tiles, ideally they should use a water-cooled tile cutter, or if skilled enough they could use an angle grinder type cutter with the appropriate blade (i.e. unslotted and continuous). The suggested grout joint between the Handmade Terracotta tiles can vary from 5-8mm due to size tolerance and edge finish. On the Reclaimed Terracotta, these tiles feature an even higher size variation and will require a grout joint between 5-10mm to allow for this.

5L Mattstone Natural Stone Tile Sealer | Stone Tile Company

Shake the bottle prior to use. Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. Apply 2-3 coats of LTP Mattstone with a soft cloth or brush allowing at least 2 hours between coats. More absorbent floors may require further coats and on such floors the product should be generously applied. 1-2 hours after application, rub over the surface with a soft fluff free cloth or buffing machine to obtain a uniform finish and remove any material not yet absorbed. LTP Mattstone will dry after about two hours, but will take a further three days to become fully resistant. N.B. The aim is to completely fill the substrate with Mattstone without over applying it. Do not apply in direct sunlight. Your tiler will need to correctly prepare the tiling substrate to ensure it is flat, level solid and clean beforethey start laying the tiles.

Recommended products

Mattstone will help to inhibit oil based stains but such spillages should be wiped up immediately. On rougher surfaced floors it may be prudent to use an appropriate surface sealer in conjunction with ‘Mattstone’. Claybrook Handmade Terracottatilesare produced from natural materials and clays, so will vary in tone, surface texture and size. The nature of the handmade production can mean that pitting and uneven edges are normal and part of the product’s character.

Mattstone H2O - Water Based Impregnating Sealer - 5 Litre LTP Mattstone H2O - Water Based Impregnating Sealer - 5 Litre

Once the Mattstone sealer has been allowed to fully cure (12 hours), apply 2 coats of Ironwax Satin/Gloss with an hour between coats. Then allow 4 hours for the finish to cure before starting the grouting process using Ardex FL grout. If the tiler is not using our recommended Ardex FL grout, then please test your chosen grout on the surface of a sample tile, to ensure the grout can be cleaned away successfully. Either before the tiles are laid, or before grouting the tiles, the tiles must be sealed with at least 2 coats of LTP Mattstone and 2 coats of the finishing product Ironwax Satin/Gloss. To ensure a good seal, apply the LTP Mattstone at 2-hour intervals until the sealer starts to sit on the surface. After the final coat of Mattstone, allow 45 minutes and then buff away any excess. Terracotta has been used for hundreds of years as floors in the UK. The Romans had the art of heating rooms through the use of warmed terracotta down to a fine art. Fashions come and go as do the associated production skills. Whether the Romans left Britain or the Britain’s moved away from Roman power is still debated, either way over the next hundred years the use of Terracotta disappeared. It is safe for use on any type of grout and can be used both indoors and outdoors. This spray is great for repelling water, food stains, grease, mould, mildew, and more. One of the best things about this product though is that it is completely colourless and protects the natural colour of the grout, rather than altering it like some other grout sealing products. Key Features Shake bottle before use. Apply LTP Mattstone H20 generously and evenly using a lint free cloth, lamb’s wool applicator, paint pad or sponge. Ensure even distribution by wiping over several times. After 15 minutes, remove any excess sealer with an absorbent cloth. Polished surfaces should be finished after removal of excess by buffing with a soft lint free cloth or machine with buffing pad. This should be done while the sealer is still wet on the surface. Do not allow residues to dry on the surface.Routinely sweep the floor and wash with LTP Waxwash. Clean walls and work surfaces with LTP Stonewash Spray. Every 3 – 4 years surfaces may require more intensive cleaning in which case use LTP Grimex. Surfaces may require a top up coat of sealer after intensive cleaning. Refer to LTP Grimex technical data sheet for more information. A natural finish water based impregnating sealer. Delicately enhances colour. Helps protect against staining. LTP Mattstone is a natural, matt finish impregnating sealer that will delicately enhance the colour and texture of all natural stone and porcelain tiles. LTP Mattstone helps protect against staining and it strongly repels water, oil and grease while allowing surfaces to breathe. Once the grout has been applied and the floor is completely dry, then apply one final coat of Ironwax Satin/Gloss across the entire surface including the grout to provide the floor with a good level of protection. After 12 hours the floor can be walked on as normal. Apply 2 coats of Ironwax Satin/Gloss with an hour between coats. Then allow 4 hours for the finish to cure before starting the grouting process using Ardex FL grout. If the tiler is not using our recommended Ardex FL grout, then please test your chosen grout on the surface of a sample tile, to ensure the grout can be cleaned away successfully.

Sealers in 2023 - FindThisBest (UK) Top 7 Best Travertine Patio Sealers in 2023 - FindThisBest (UK)

LTP Mattstone H20 is a natural finish, water based impregnating sealer. It delicately enhances colour while helping protect against staining. LTP Mattstone H20 strongly repels water, oil and grease, and allows the surface to breathe.

Apply generously and evenly using a paint brush or sponge. On highly absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated. After 1 hour remove any excess sealer with an absorbent towel. After one hour rub over the surface with a soft fluff free cloth or buffing machine to obtain a uniform finish and remove any excess sealer. LTP Mattstone will dry after about two hours, but will take a further three days to become fully resistant. N.B. The aim is to completely fill the substrate with sealer without over applying it. Do not apply in direct sunlight. LTP Mattstone will help to inhibit oil based stains but such spillages should be wiped up immediately. On rougher surfaced floors it may be prudent to use an appropriate surface sealer as well. Shake bottle before use. Apply generously and evenly using a lint free cloth, lambs wool applicator, paint brush or sponge. Leave surfaces to dry.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment